2D Barcode Camera Setup; Turn On The 2D Barcode Camera - Pitney Bowes Relay 3000 User Manual

5 • Barcode Scanning

2D Barcode Camera Setup

Setting up the 2D barcode camera is an operator activity.

Turn On the 2D Barcode Camera

You can alternate between OMR (if your system has this option) and
barcode scanning, depending on the features available on your system.
1. To enable 2D barcode scanning, turn the 2D barcode camera on
using the On/Off switch.
2. To disable 2D barcode scanning, turn the 2D barcode camera off
using the On/Off switch.
• When the 2D barcode camera is powered On, all LEDs flash once.
• The blue LED, located where the cable enters the 2D barcode
camera, indicates the reader is powered correctly.
5-8
Blue LED
Barcode Camera
On/Off
Switch
All LEDs
flashing
SV63138 Rev. A