Pitney Bowes Relay 3000 User Manual page 45

Set the Sealer
This setting appears only if insertion mode is selected.
1. Select whether or not you want to seal envelopes.
2. Tap the
3. Tap to accept the option and advance to the next setting.
• If you selected either of the sheet feeders, continue to the Set
Paper Length setting.
• If you are using the insert feeder only, folding is not possible; skip
to the Set Envelope Depth setting.
Sealer Options
Icon Option
On
Off
Set Paper Length
1. Use the scale on the side of
the inserter cover to measure
the paper.
- US letter - 279mm (11 inches)
- A4 paper - 297mm
2. Tap the
scroll through paper lengths
(displayed in mm).
3. Tap to accept the paper
length value and advance to
the next setting.
SV63138 Rev. A
icons to toggle the option to On or Off.
Description
Turns the sealer unit on for automatic sealing of
envelopes. Make sure the sealer water bottle is full of
E-Z Seal ® or water.
Turns the sealer unit off. Envelopes will be ejected
unsealed.
icons to
Program a Job ● 2
2-19