Folding Example:
For an A4 size sheet, the half
fold measurement is 105mm.
If the distance from the edge
of the form to the middle of the
scan dash marks is 10mm, the
scanning head setting will be
95mm (105mm – 10mm).
5. Loosen the locking knob and set the relevant scanning head to the
correct setting.
6. Retighten the locking knob.
7. If you adjusted the bottom sheet feeder scanner, install both sheet
feeder 2 and the fold plate situated below sheet feeder 2.
SV63138 Rev.A
Locking Knob
OMR Scanning • 4
10mm
105mm
10mm
4-13