Modify An Existing Job; Delete A Job - Pitney Bowes Relay 3000 User Manual

Modify an Existing Job

To modify an existing job follow these steps. (This requires Supervisor
level access.)
1. Tap the Setup button to enter setup mode.
2. The Enter Access Code field displays over the inserter model on the
touch screen display. Tap
3. Tap to accept the code and advance to the job selection.
4. Tap the
5. Tap to accept the job selection and advance to the job
programming settings.
6. Tap the
7. Tap the
8. Tap to accept the job setting.
9. Tap the Setup button to save the changes and exit setup mode.

Delete a Job

To delete an existing job from the inserter system follow these steps. (This
requires Supervisor level access.)
1. Tap the Setup button to enter setup mode.
2. The Enter Access Code field displays over the inserter model on the
touch screen display. Tap
3. Tap to accept the code and advance to the job selection.
4. Tap the
5. Tap the
confirm."
6. Tap the
is erased.
7. Tap the Setup button to exit setup mode.
SV63138 Rev. A
icons to display the job you wish to modify.
icons to scroll through the setting(s).
icons to scroll through the options or desired values.
icons to display the job you wish to delete.
to delete the job. The display shows "Press again to
again. The display briefly shows "Deleting Job" as the job
Program a Job ● 2
to increase or decrease to 71.
to increase or decrease to 71.
2-23