Select A Job - Pitney Bowes Relay 3000 User Manual

Select a Job

When the inserter is turned ON and you are logged in, the touch screen
displays the last job run with the message Trial Piece Required.
Select the job you wish to run.
1. Tap the Job button to scroll through the jobs,
until the job you want displays, OR tap the
Default button if you want to run the inserter
with your default job settings.
NOTE: Only a PB Service Representative can
modify default job settings.
2. Load material - refer to the Loading Material
section in this guide.
3. If material is already loaded, tap the Trial
Piece button. The inserter sets itself and runs
a test piece for you to check.
SV63138 Rev. A
3 ● Run a Job
3-5