3 ● Run a Job
Adjust and Load the Insert Feeder
The insert feeder feeds items that do not require folding. Depending on
configuration of your inserter, you may not have an insert feeder.
1. Use the side guide adjustment
knob to adjust the side guides
to the width of the inserts you
are running. Once adjusted,
back-off the adjustment knob
1/4 turn.
This sets the correct clearance
between the guides and inserts
2. Refer to the labels located on
the insert feeder and match
your insert type (slip, reply
envelope, pre-folded, booklet)
with the icon and color.
Identifying Your Insert
If the label indicates a range of
settings, we recommend you
select a higher number or letter for
a thicker the insert
3. Set the blue separator gap
lever to the number required.
4. Set the blue separator shield
lever to the letter required.
3-10
.
.
SV63138 Rev. A