Pitney Bowes Relay 3000 User Manual page 33

Scanning Settings Table (OMR and Barcode)
Some of the OMR settings have been configured to apply to both OMR
and barcode scanning jobs. When you are running barcode scanning
applications, use the OMR functions that apply to barcode scanning.
OMR and Barcode Settings Table
OMR Settings
OMR off
OMR on
OMR + Sequence
OMR + Select feed
OMR + Select feed +
Sequence
OMR Offset on
OMR Offset + Sequence
OMR Offset + Select feed
OMR Offset + SF +
Sequence
NOTE: Available options depend on the scanning functionality of your inserter.
NOTE: The maximum number of pages per envelope that can be fed from this
feeder when using barcode scanning must fall within the limits of the inserter.
NOTE: Sheet feeder options SF Double Detect and On SF are not supported
when using barcode scanning.
SV63138 Rev. A
OMR or barcode scanning is turned off for this
job.
OMR or Basic barcode scanning is enabled for
this job with standard OMR mark positioning.
OMR scanning + Wrap Around Sequence
scanning is enabled for this job, with standard
OMR mark positioning.
OMR scanning + Select Feed/Autobatch
scanning for this job, with standard OMR mark
positioning.
OMR scanning + Select Feed/Autobatch
+ Wrap Around Sequence OR Enhanced
barcode scanning is enabled for this job, with
standard OMR mark positioning.
OMR scanning is turned on for this job, with
offset OMR mark positioning.
OMR scanning + Wrap Around Sequence
scanning is enabled for this job, with offset
OMR mark positioning.
OMR scanning + Select Feed/Autobatch
scanning is enabled for this job, with offset
OMR mark positioning.
OMR scanning + Select Feed/Autobatch +
Wrap Around Sequence scanning for this job,
with offset OMR mark positioning.
Program a Job ● 2
Description
2-7