Program A Non-Scanning Job - Pitney Bowes Relay 3000 User Manual

2 ● Program a Job

Program a Non-Scanning Job

Follow this sequence of steps to program a non-scanning job.
NOTE: If scanning is not available on your system, begin with "Set Accumulation."
Disable Scanning (OMR or Barcode) if Functionality Exists
If scanning is enabled on your system, set it to OMR off.
1. When prompted, tap the
2. Tap to accept the selection and advance to the next setting.
Set the Fold Type
1. Tap the
2. Tap to accept the fold type and advance to the next setting.
Fold Types
C - Letter
When the fold type is selected, the display indicates the correct orientation
of the paper for loading into the feeders:
NOTE: For accumulation jobs, DO NOT manually change the automatic fold length
dimensions at the Fold A and Fold B settings.
2-14
icons to scroll through the fold types.
Z - Accordion
FACE UP
HEAD FIRST
icons to select OMR off.
Double
FACE DOWN
FEET FIRST
Single
SV63138 Rev. A