Access Areas Of The Inserter For Jam Removal; Sheet Feeders Trays - Remove And Replace; Clear Material - Pitney Bowes Relay 3000 User Manual

Clear Material

The inserter is designed to assure maximum performance. In the event
of a material stoppage, the display flashes a symbol indicating where the
stoppage has occurred.
To clear a jam follow these steps.
1. Tap the Clear Deck button to feed the material through the inserter.
2. If this doesn't work, manually remove the remove the trays and fold
plates related to the jam to gain access to the jammed material.
Manual Advance Knob
Once you locate the jammed
material, you may need to use
the manual advance knob to
manually feed paper out of the
grip of feed rollers.
The manual advance knob is
located behind the drop-down
cover at the left front of the
inserter.

Access Areas of the Inserter for Jam Removal

Sheet Feeders Trays - Remove and Replace

To remove the sheet feeder trays:
1. Lift the rear of the tray slightly
and pull it straight out from
the inserter.
NOTE: If the tray is loaded,
gently hold the material in place
to prevent it sliding forward as
the tray is removed.
To replace the sheet feeder trays:
1. Place the tray into its location guides in the side frames.
2. Lift the rear of the tray slightly and push it into the inserter. The tray
automatically drops into its correct position.
SV63138 Rev. A
Clear Material • 6
6-3