Pitney Bowes Relay 3000 User Manual page 41

Set Accumulation
If accumulation is enabled, it allows multiple sheets to be fed from the
sheet feeder into the envelope. This setting is only available for non-
scanning jobs.
1. Tap the
2. If you set accumulation to ON:
a. Tap
envelope. (Accumulation = 2 to 10)
b. Tap the
3. Tap to accept the option and advance to the next setting.
Inserter Accumulation Settings
Setting
Accumulation: OFF
Accumulation From Main
Accumulation From Suppl
Accumulation = (2 to 10)
IMPORTANT! The number of sheets that can be accumulated is limited by inserter
specifications. Exceeding this limit can cause a malfunction.
SV63138 Rev. A
icons to scroll through the accumulation options.
to set the number of pages to feed into each
icons to enter the number of pages.
Description
Accumulation is turned off for this job.
Accumulation is turned on with sheets feeding
from the main feeder. This feeder normally
contains the address sheet.
Accumulation is turned on with sheets feeding
from the supplementary feeder - one address
sheet from the main feeder followed by multiple
sheets from the supplementary feeder.
If Accumulation is ON, select how many pages
you want to feed into each envelope.
Program a Job ● 2
2-15