Envelope Feeder - Pitney Bowes Relay 3000 User Manual

8 • Material Specifications

Envelope Feeder

Minimum Envelope Size: 3.5 inches (88mm) depth
Maximum Envelope Size: 6.5 inches (164mm) depth
Envelope Weights:
Envelope Tray Capacity: Up to a maximum of 300 24 lb. (90gsm)
End Clearance:
Depth Clearance:
Envelope Flap and Throat Requirements:
Min 25.5mm
(1 in.)
Min 25.5mm
Max 63mm
Max 63mm
(2.5 in.)
8-6
8.5 inches (220mm) width
9.5 inches (242mm) width
17 lbs. (65gsm) minimum
26 lbs. (100gsm) maximum
envelopes.
End clearance between insert and envelope
is a minimum of 0.236 inches (6mm) at each
side. That is, a minimum of 0.472 inches
(12mm) overall. Take this measurement with
all documents placed in the envelope.
The insert must allow a minimum clearance of
0.118 in. (3mm) for unfolded documents, and
0.236 in. (6mm) for folded documents, below
the flap crease after it is fully inserted into the
envelope.
Min 6mm (0.25 in.)
Max 41mm
(1.6 in.)
Closed flap tip should not
come closer than
44mm to bottom
44mm (1.73 in.) to bottom
of envelope
WIDTH
19mm
(0.75 in.)
Min 1.6mm
(0.063 in.)
Max 6mm
(0.25 in.)
throat depth
19mm (0.75 in.) at 19mm in from
edge of envelope
in from edge of
envelope
SV63138 Rev. A