Pitney Bowes Relay 3000 User Manual page 42

2 ● Program a Job
Set First/Main Sheet Feeder
The first feeder is automatically selected depending on the fold type.
• Collating different sheets using both sheet feeders - load the prime
(address-bearing) document into sheet feeder 1 for C and double
folds. Load it into sheet feeder 2 for Z or single folds.
• Running a single sheet - use either sheet feeder or use both with
the linked feeder feature described in the following Sheet Feeder 1
Options table.
1. Tap the
2. Tap to accept the selection and advance to the next setting.
First/Main Sheet Feeder Options (Non-Scanning Jobs)
Icon Option
On Double Detect
Off
On
Manual Feed (see the
description following
this table)
Linked: On
(only available on
3-station inserters)
Linked: On Double
Detect
(only available on
3-station inserters)
2-16
icons to scroll through the options.
Description
Feeder on with the double detector
operating. (The double detector stops
the inserter if two or more sheets feed
simultaneously.)
Feeder turned off for this job.
Feeder on without the double detector.
Able to manually feed collated sets. Only
available on sheet feeder 1.
Feed will initially come from the first
sheet feeder. When that feeder is empty,
the inserter automatically switches
feeding from the second sheet feeder.
When a trial piece is requested, both
feeders must be loaded, as a trial piece
will feed from each feeder.
SV63138 Rev. A