Pitney Bowes Relay 3000 User Manual page 37

Set Fold A
1. Select the size of the first fold required.
NOTE: Depending on the settings you made earlier for fold type and paper
length, the inserter suggests the correct dimension for the first fold. Most of the
time this setting will prove satisfactory.
2. To change the standard fold setting, tap the
length of required fold displays. A
panel you are setting.
NOTE: The inserter automatically limits your options to available specifications
on your inserter. (As you change the length of fold A, the dimension of fold
B changes automatically to keep within the correct paper length and inserter
specifications.)
3. Tap to accept the fold value and advance to the next setting.
Set Fold B
1. Select the size of the second fold required.
NOTE: Similar to setting fold, the inserter suggests the correct dimension for
fold B.
2. To change the standard setting, tap the
fold required displays. A
are setting.
3. Tap to accept the fold value and advance to the next setting.
• Inserting jobs - continue to the Set the Envelope Depth setting.
• Fold-only job - there are no more job settings, skip to Confirming
the Job Setup.
Set Envelope Depth
1. Use the scale on the front cover to measure the envelope depth.
2. Tap
3. Tap to accept the value and advance to the next setting.
SV63138 Rev. A
to scroll through the measurements (displayed in mm).
Program a Job ● 2
icon displays next to the fold
icon displays next to the fold panel you
icons until the
icons until the length of
2-11