Pitney Bowes Relay 3000 User Manual page 35

Set Select/Supplementary Sheet or Insert Feeder
Select feed allows for one piece to be selectively fed from either feeder per
envelope.
1. Tap the
Additional Feeder Options, Scanning Jobs table for details.)
2. Tap to accept the option and advance to the sealer setting.
Additional Feeder Options (Scanning Jobs)
Icon Option
On Double Detect
On SF Double Detect
(not shown on single or
Z folds)
On SF (not shown on
single or Z folds)
Off
On (not shown on single
or Z folds)
Setting the Scanning Feeder:
• If sheet feeder 1 is set for the main/scanning feeder - you can
program sheet feeder 2 and/or the insert feeder for normal (one per
envelope) feeding or select feeding.
• If sheet feeder 2 is set for the main/scanning feeder - you can
program sheet feeder 1 and/or the insert feeder for normal (one per
envelope) feeding or select feeding.
SV63138 Rev. A
icons to scroll through the options. (Refer to the
Program a Job ● 2
Description
Feeder on with the double detector
operating. (The double detector stops
the inserter if two or more sheets feed
simultaneously.)
Select feeder on with the double detector
operating. (The double detector stops
the inserter if more than one sheet
simultaneously feeds from the feeder.)
Select feeder on without the double
detector.
Feeder turned off for this job.
Feeder on without the double detector or
select feed.
2-9