Optical Mark Recognition (Omr); Accuracy; Omr And Feeders On The Inserter - Pitney Bowes Relay 3000 User Manual

Optical Mark Recognition (OMR)

An OMR mark is normally a dark solid line on a
sheet of light colored paper that is perpendicular
to the direction of paper travel. This line must be
thick and dense to trigger the OMR scanner.
The OMR scanner works with the OMR system
software to check for one or more different OMR
marks on a document as it is fed through the
system. Tracking of these marks enhances mail
piece integrity by assuring the documents that
belong together (a set) stay together throughout
the inserting process.
NOTE: Depending on the model, your inserter
may be equipped with OMR scanning.
NOTE: For instructions on programing an OMR job, refer to the
Programing a Job section of this manual.

Accuracy

OMR on this system uses extensive error checking. This means insertion
accuracy is very high: the probability of the wrong set of sheets being
inserted into an envelope is low.

OMR and Feeders on the Inserter

OMR-equipped models have scanning heads on each sheet feeder.
One of the sheet feeders holds sheets with OMR marks and they feed
multiple sheets per envelope.
• Sheet feeder 1 for C-fold and double fold
• Sheet feeder 2 for Z-fold and single fold
You can set up the sheet and insert feeders to be under the selective
control of the OMR sheets. As a result, you can use OMR to fill an
envelope with a variable number of sheets from one feeder, with or without
a supplementary sheet and an insert.
A supplementary sheet and folded insert are nested with the first sheet
in the envelope. Because OMR applications allows each envelope to
contain tailored contents, the last sheet in the envelope includes address
information for use with windowed envelopes. This ensures that each set
of sheets is addressed to the correct recipient.
SV63138 Rev.A
OMR Scanning • 4
Typical
OMR marks
4-3