This section provides step-by-step instructions for setting up and saving
a new scanning or non-scanning job and saving it using the touch screen
display. Programming a job is typically a Supervisor activity.
Navigate Using the Touch Screen
To help visually guide you through the programing sequence, a
appears on the display next to the area being set.
•
Tap the
•
Once the desired setting displays, tap the
through available options or values for the selected setting.
•
Tap
to accept the selection and advance to the next setting.
NOTE: For icon locations and descriptions, refer to the "System Overview" section
of this guide.
SV63138 Rev. A
icons to scroll through and select available settings.
Program a Job ● 2
icons to scroll
icon
2-3