Load Material; Adjust And Load The Sheet Feeders - Pitney Bowes Relay 3000 User Manual

Load Material

Adjust and Load the Sheet Feeders

1. Adjust the side guides to the
width of the material, then
back-off a quarter turn on the
side guide control. This sets
the correct clearance between
the guides and the material.
2. Aerate (fan) the stack of paper
to ensure that individual sheets
are not stuck together.
3. Jog stack back into alignment.
The display indicates the correct
orientation of the paper.
FACE UP
HEAD FIRST
4. Place the paper stack onto the
feed deck. Allow the deck to
move down and the top of the
paper stack to slide under the
feed roller.
SV63138 Rev. A
FACE DOWN
FEET FIRST
3 ● Run a Job
3-7