Dialing From A Legacy H.323 Endpoint Into A Vidyo Pin Protected Room - Vidyo VidyoGateway Administrator's Manual

5. Configuring Your System
Note The SIP SRV record FQDN must be configured as [examplecompany.com] and it must be
configured by your network administrator to point to the VidyoGateway IP address
(Standalone or Cluster).
For more information, refer to your Legacy equipment documentation.
For multi-tenant systems, you must associate [examplecompany.com] to Tenant1. To do
this, configure the Tenant VidyoGateway SIP/H.323 SRV record FQDN field to your
[examplecompany.com] FQDN in the Super portal as part of the "tenant1" configuration.
For more information, refer to the "Managing Tenants as the Super Admin" section in the
VidyoConferencing Administrator Guide
For more information about SIP URI configuration, see
Dialing From a Legacy H.323 Endpoint into a Vidyo PIN Protected
Room
[VidyoGateway IP Address ] + [TCS4 delimiter] + [VidyoGateway service prefix] + [Vidyo
extension] + [VidyoGateway PIN delimiter] + [Vidyo Users Room PIN]
Example: 192.168.1.110##035001*1234 (This is a Polycom Lifesize call string coming into a
Vidyo PIN protected room.)
.
Configuring the VidyoPortal
92
Settings.