Understanding The Vidyogateway Configuration Procedure; Making Configurations On Your Vidyogateway; Making Configurations On Your Vidyoportal For Your Vidyogateway - Vidyo VidyoGateway Administrator's Manual

2. Understanding the VidyoGateway
Configuration Procedure
The overall procedure for configuring your VidyoGateway requires cumulative steps performed on
both the VidyoPortal and the VidyoGateway as described in the following procedures. Complete all
of the following steps on your VidyoGateway and VidyoPortal in the order they appear.
Note If you are clustering VidyoGateways, perform the entire procedure for each VidyoGateway in
your cluster.

Making Configurations on Your VidyoGateway

To make configurations on your VidyoGateway:
1. Configure your network interface settings in the VidyoReplay System Console. The
following criteria should be met:
a. Set your production and management interfaces with IP addresses.
b. Rack your machine properly.
c. Successfully Ping your server before proceeding.
For more information, see
2. Secure your VidyoGateway server (if applicable).
For more information, see
3. Register your VidyoGateway to your VidyoPortal by entering your VidyoPortal address in
your VidyoGateway.
For more information, see
Making Configurations on Your VidyoPortal for Your
VidyoGateway
To make configurations on your VidyoPortal for your VidyoGateway:
1. Add the VidyoGateway as a component to the VidyoConferencing system.
Configuring Network Settings at the System
Securing Your VidyoGateway System with SSL and
Configuring the VidyoPortal
6
Console.
Settings.
HTTPS.