Configuring An Snmpv2 Community String - Vidyo VidyoGateway Administrator's Manual

3. Configuring Your Server
6. Select y to confirm the change and enable or disable SNMP.
7. Select X to exit.
8. Select X to exit Advanced Options.
9. Select 14 to reboot system.
When your system comes back online, SNMP is then enabled (or disabled).

Configuring an SNMPv2 Community String

You can create two SNMPv2 community strings on your system that can access your network
management server. One community string has read-only access and the other has read-write
access.
To configure an SNMP community string:
1. Log in to the System Console.
For more information, see
the Default Password.
2. Enter m for more options.
3. Enter A for Advanced Options.
4. Enter A for SNMP Administration.
5. Enter B to configure SNMPv2 Community String.
Select from the menu based on the SNMPv2 Community String type desired.

Enter 1 to create a read-only SNMPv2 community string.
Enter a read-only community string.

The string must be at least eight characters and contain no spaces.
Enter y to confirm.

After the read-only community string is created, the Create ReadOnly Community String
option toggles and becomes the Delete ReadOnly Community String option.

Enter 2 to create a read-write SNMPv2 community string.
Enter a read-write community string.

The string must be at least 8 characters and contain no spaces.
Enter y to confirm.

After the read-write community string is created, the Create ReadWrite Community
String option toggles and becomes the Delete ReadWrite Community String option.
 Select X to return to the SNMP Administration menu.
Logging in to the System Console of Your Server and Changing
26