Vidyo VidyoGateway Administrator's Manual page 84

5. Configuring Your System
4. Select Controller 1 from the Role drop-down.
5. In the additional fields, configure Controller 1 as follows:
 Enter a Controller 2 Hostname.
Provide the Hostname exactly as it's shown in the System Console and do not provide
an FQDN as the Peer Host Name.
 For more information, see

Enter a Controller 2 IP Address.
 Enter a Shared Controller IP Address.
This is the address that will be dialed by incoming calls (including Legacy callers).
 Enter a notification email address.
Enter the email address you want to receive notifications in the event of a system
failure.
6. Click Save and Reboot.
 Any modifications you make to your Clusters accrue until you click Save and Reboot,
when all of your Cluster changes are applied to your VidyoGateway server.
 When you click Save and Reboot, a dialog box informs you that the change drops all of
the active conference calls on your VidyoGateway server.
Configuring Network Settings at the System
78
Console.