Sip Incoming Call Using A Prefix Example; Sip Incoming Uri Dialing Example - Vidyo VidyoGateway Administrator's Manual

5. Configuring Your System
[VidyoGateway IP Address]![VidyoGateway incoming service prefix] + [Vidyo username or
extension]
Example: 192.168.1.110!035001
 An incoming VidyoGateway call (without a gatekeeper) from a Legacy H.323 endpoint:
[VidyoGateway IP Address] + [TCS4 delimiter] + [VidyoGateway incoming service prefix] +
[Vidyo extension]
Example: 192.168.1.110##035001
Note This particular example is for Polycom and Lifesize endpoints using ## as the TCS4
delimiter. For additional delimiter examples, see
 An incoming VidyoGateway call (without a gatekeeper) from a Tandberg/Cisco H.323
endpoint:
[VidyoGateway service prefix] + [Vidyo extension]@[VidyoGateway IP Address]
Example: 035001@192.168.1.110
Note Some Tandberg/Cisco endpoints (such as the C series) require h323: in front of dial string. If
the Tandberg/Cisco does not accept the call with the h323: starting the dial string, check
your endpoint to ensure H.323 settings are enabled. Use the Tandberg/Cisco web UI to
make settings as the handheld remote is rather cumbersome.
Example: h323: [VidyoGateway service prefix] + [Vidyo extension]@[VidyoGateway IP
Address]

SIP Incoming Call Using a Prefix Example

Service prefixes can be used to set all of your incoming calls as either P2P or Conference, as
desired. For more information, see

An incoming VidyoGateway call from a Legacy SIP endpoint:
[VidyoGateway Incoming service prefix] + [Vidyo username or extension]@[VidyoGateway IP
Address]
Example: 075001@192.168.1.11

SIP Incoming URI Dialing Example

[jsmith@examplecompany.com]
Where jsmith is Member of the tenant named "tenant1."
TCS4
Managing Services.
91
Delimiters.