Vidyo VidyoGateway Administrator's Manual page 76

5. Configuring Your System
the VidyoGateway and the VidyoRouter.
You must specify a minimum range of 1000.

In the H.245 Min TCP Port field, enter the minimum port number to use for H.243 traffic.
The value must be an inclusive number between 1 and 65535.
 In the H.245 Max TCP Port field, enter the maximum port number to use for H.243
traffic. The value must be an inclusive number between 1 and 65535.
5. In the PIN Delimiter field, enter the character you want used as the separator between the
username and the personal identification number on PIN-protected endpoint call requests.
6. If a single call participant enters a VidyoConference from a Legacy endpoint and remains
the only member of the call for a specified time (in minutes) entered in the Last Participant
field, he or she is automatically disconnected from the conference after the time elapses.
This feature has a default setting of 0 (zero) which disables the timeout. Enter an amount of
time (in minutes) to avoid lone VidyoConference participants from Legacy endpoints
accidentally tying up lines to VidyoConferences.
7. In the Display Option drop-down, select Display Name, E.164, or E.164 & Display Name to
determine the items you want included for identification purposes on your calls and added
to the CDR data on your VidyoPortal.
8. Select the Call Notification API checkbox if you want to enable VidyoGateway to convey to
the external application the details of an incoming call (including the extension dialed,
source IP address, protocol, and device information) and to receive a response with either
a new dial string that will be used for connecting the call to the VidyoPortal or an indication
to reject the incoming call.
When you select this checkbox, additional fields appear and you must do the following:
a. In the Call Notification API URI field, enter the URI address for which the API call should
be made.
b. In the Timeout (in ms) field, enter the time in milliseconds to wait to get a response
back from the external application.
The default is 2000 ms.
c. In the optional API Username and Password fields, enter the credentials to be used for
authentication against the external application.
Note The faults received from the external application (as detailed in the
User Guide
) are mapped to the following IVR prompts:
- 425 is mapped to "Retry Locked Room"
- 404 is mapped to "Retry Conference Extension"
- Other faults are mapped to "Retry Room Generic Error"
70
Vidyo Web Services API