Adding A Network Route - Vidyo VidyoGateway Administrator's Manual

3. Configuring Your Server
2. Enter m for more options.
3. Enter A for Advanced Options.
4. Enter 2 for Network Route Management.
Route Management
The
(routes); navigate routes using Next or Previous; and exit the
5. Enter X to return to the Advanced Options menu.

Adding a Network Route

Currently, you can only add a static route for one host at a time. Adding static routes for a range of
IP addresses (or subnet) is not supported at this time.
To add a network route:
1. Log in to the System Console.
For more information, see
the Default Password.
2. Enter m for more options.
Enter A for Advanced Options.
3.
Enter 2 for Network Route Management.
4.
5. Enter 1 to add a Network Route.
6. Enter the following information:

Destination – Enter an IP address of the target machine for your network route.
 Gateway – Enter the IP address of the Gateway through which your network route will
travel.
 Interface – Enter the PRODUCTION (eth0) or MANAGEMENT (eth1) interface you want
your network route to use.
screen displays. Use this screen to Add, Remove, or Remove All
Logging in to the System Console of Your Server and Changing
21
Route Management
screen.