4. Configuring RADIUS
The Remote Authentication Dial-In User Service (RADIUS) can be enabled for VidyoPortal,
VidyoRouter, and VidyoGateway servers. This configuration is optional and you do not have to
install it unless you plan on using RADIUS.
Disabling FIPS Mode
RADIUS configuration is allowed only when the Vidyo server has FIPS disabled. If FIPS is enabled,
follow the procedures in this section to disable it. If FIPS is already disabled, then proceed to the
Enabling RADIUS
section.
To disable FIPS mode:
1.
Log in to the System Console.
2.
Enter m for more options.
3.
Enter A for Advanced Options.
4.
Enter 1 to disable FIPS mode.
Note
This setting toggles between disable and enable states.
A message displays stating the following: CDR access and RADIUS authentication are
allowed with FIPS-mode disabled.
45