Vidyo VidyoGateway Administrator's Manual page 37

3. Configuring Your Server
2. Enter m for more options.
3. Enter A for Advanced Options.
Enter 4 for SNMP Administration.
4.
5. Enter D to configure SNMP Notification.
The SNMP Notification menu displays.
6. Enter 2 for SNMPv3 Notification.
The SNMP Notification menu displays.
Enter 1 for SNMPv3 Notification User.
7.
8. Enter the IP or FQDN address of your network management server.
Enter I or T to configure an Inform or Trap notification type.
9.
The system asks for the values in the remaining steps if your notification type is Inform or
Trap.
10. Optionally enter your Remote Engine ID.
11. Enter your user name.
The user name must be at least eight characters and contain no spaces.
12. Enter and verify an authentication password of your choice.
This password uses SHA authentication, and must be at least eight characters.
Note Vidyo does not currently support MD5 authentication.
13. Enter and verify a second authentication password of your choice.
This password uses AES encryption, and must be at least eight characters.
Note Vidyo does not currently support DES encryption.
After SNMPv3 notification users are created, they are listed in the top of the SNMPv3
Notification menu and Delete SNMPv3 Notification User displays as a second option.
14. Enter X to return to the SNMP Notification menu.
Deleting an SNMPv3 Notification
To delete an SNMPv3 notification:
1. Log in to the System Console.
For more information, see
the Default Password.
Logging in to the System Console of Your Server and Changing
31