Table of Contents
Advertisement
5. Configuring Your System
Note
If you select more than one protocol (i.e. TLS, TCP, and/or UDP), inbound traffic will be
received on any of the selected protocols. However, your VidyoGateway will send outbound
media based on your selections and applying a preferential order of TLS to TCP to UDP.
For example, if you select all three (TLS, TCP, UDP), the VidyoGateway will be listening to
inbound traffic on three protocols. For outbound traffic, the VidyoGateway will only attempt
TLS.
6.
Use the BFCP Protocol drop-down to select one of the following:
Select Offer both UDP and TCP, and answer either to offer and answer both protocols.
Select Offer only UDP / prefer UDP on answer to only offer the UDP protocol and prefer
it when answering calls.
Select Offer only TCP / prefer TCP on answer to only offer the TCP protocol and prefer
it when answering calls.
Note
VidyoGateway can only act as a BFCP server.
7.
When using a Proxy Address, provide the following information:
a.
Enter a Proxy Address.
b.
Select one of the following:
Select outbound only if you want to only route outbound calls through your proxy.
With outbound only selected, all calls are sent to the proxy; however, inbound calls
are accepted from any device.
Select inbound & outbound to route both inbound and outbound calls through your
proxy.
With inbound & outbound selected, calls received from any device other than the
proxy are rejected.
8.
Enter the username for your proxy server.
9.
Enter the password for your proxy server.
10.
Click Save or Save and Apply as desired.
When you click Save and Apply, a dialog box informs you that the change drops all of
the active conference calls on your VidyoGateway server.
59
Hide quick links:
Advertisement
Table of Contents
