Table of Contents
Advertisement
4. Configuring RADIUS
7.
Enter the preshared key for the RADIUS server.
8.
Enter the IP or FQDN for additional RADIUS servers or leave blank to finish.
Note
A maximum of 10 RADIUS servers is supported.
9.
Enter the preshared key for the additional RADIUS server.
10.
Enter the IP or FQDN for additional RADIUS server or leave blank to finish.
Note
In the following screenshot, two RADIUS servers were configured causing this prompt to
display. This prompt will only display if two or more RADIUS servers are being configured. If
you do not have additional RADIUS servers to configure, leave blank to finish.
RADIUS is enabled.
11.
Press any key on your keyboard to return to the User Maintenance menu.
Viewing the Current RADIUS Configuration
You should always review your RADIUS server configurations for accuracy.
To view the current RADIUS configuration:
1.
Log in to the System Console.
2.
Enter D.
The RADIUS server configurations display.
3.
Enter n for the change settings prompt if the configuration does not need to be
modified.
47
Hide quick links:
Advertisement
Table of Contents
