Vidyo VidyoGateway Administrator's Manual page 101

5. Configuring Your System
IVR
2. Click the tab.
3. Enter General settings for your IVR. Available choices include the following:
a. In the First Screen Options drop-down, select one of the following notification types to
be first shown from your VidyoGateway server IVR Interface:
Select call type selection to make both conference and direct calls available from

the first screen. The Select Call Type notification displays. For more information
about the Select Call Type notification, see
Types.
Select conference call only to make only conference calls available from the first

screen. The Enter Conference Extension notification displays. For more information
about the Enter Conference Extension notification, see
Prompt
Select direct call only to make only direct calls available from the first screen. The

Enter Direct Call Extension notification displays. For more information about the
Enter Direct Call Extension notification, see
Types.
b. In the Display Name field, enter the name of your VidyoGateway to be shown when
calling in from Legacy devices.
c. In the Voice Repeat Interval (seconds) field, enter a numeric time value (in seconds) to
elapse between repeated voice responses.
d. In the Inactivity Timeout (seconds) field, enter a numeric time value (in seconds) to
elapse before a Legacy endpoint is disconnected from your VidyoGateway due to
inactivity.
Types.
VidyoGateway IVR Screen Prompt
VidyoGateway IVR Screen Prompt
95
VidyoGateway IVR Screen