Configuring Snmp - Vidyo VidyoGateway Administrator's Manual

3. Configuring Your Server

Configuring SNMP

You can use SNMP (Simple Network Management Protocol) to manage and monitor the
components over your entire Vidyo network. You can configure notifications or traps and send
them to your network management server via SNMPv2 community strings or SNMPv3 users.
The VidyoGateway traps include the following object identifiers (OIDs):
1. vidyoGatewayNodeLegacyMediaQualityThresholdAlert

This trap provides an indication that the MediaQuality threshold for a Legacy call has
been reached on the legacy side.

This trap can be turned on and off by setting the notification from the System Console
and a specific threshold can be set from the SNMP manager. The jitter is measured in
milliseconds and the default time setting is 0.

This trap repeats every 10 seconds as long as the condition persists.
2. vidyoGatewayNodeLegacyPacketLossThresholdAlert
 This trap provides an indication that the PacketLoss threshold for a Legacy call has
been reached on the legacy side.
 This trap can be turned on and off by setting the notification from the System Console
and specific threshold can be set from the SNMP manager. The packet loss is
measured in percentage and the default time setting is 0.
 This trap repeats every 10 seconds as long as the condition persists.
3. vidyoGatewayControllerJoinedClusterAlert

This trap provides an indication that a new VidyoGateway has joined the cluster.
 When a VidyoGateway node is added to the cluster, this trap can be turned on and off
by setting the notification from the System Console.
 There is no notification frequency setting for this trap.
4. vidyoGatewayControllerLeftClusterAlert

This trap provides an indication that an existing VidyoGateway has been removed from
the cluster.

When a VidyoGateway node is removed from the cluster, this trap can be turned on
and off by setting the notification from the System Console.
 There is no notification frequency setting for this trap.
5. vidyoGatewayControllerVmConnEstablishedAlert
 This trap provides an indication that VidyoGateway has established a connection with
the VidyoManager.
 There are no configuration settings for this trap.
 There is no notification frequency setting for this trap.
24