Table of Contents
Advertisement
5. Configuring Your System
SIP
2.
Click the
tab.
3.
When using the TLS protocol, provide the following information:
a.
Select the TLS checkbox to encrypt the SIP signaling between the VidyoGateway and a
proxy server.
When this checkbox is selected, all outbound SIP calls will use TLS.
b.
Enter a port value for TLS.
c.
Select the require encryption checkbox to only allow calls in which the media is
encrypted via the secure real-time transport protocol (SRTP).
When this checkbox is not selected, calls without SRTP media encryption are permitted
on the VidyoGateway.
4.
When using the TCP protocol, provide the following information:
a.
Select the TCP checkbox to enable SIP over TCP support.
If TLS is not enabled, then all outbound SIP calls will use TCP, which is not encrypted.
b.
Enter a port value for TCP.
5.
When using the UDP protocol, provide the following information:
a.
Select the UDP checkbox to enable SIP over UDP. If both TLS and TCP are not
enabled, then all outbound SIP calls will use UDP, which is not encrypted.
b.
Enter a port value for UDP.
58
Hide quick links:
Advertisement
Table of Contents
