Configuring A Public Ip Address And Viewing Your Vidyogateway Network Settings; Configuring A Public Ip Address - Vidyo VidyoGateway Administrator's Manual

5. Configuring Your System
5. Click the X button on the right of a row to drop the call.
6. Click Refresh to reload the statistical data showing on Call Statistics.
Configuring a Public IP Address and Viewing Your
VidyoGateway Network Settings
Network
The tab allows you to configure a public IP address and view network settings for your
VidyoGateway server.
Configure your network settings using the System Console. For more information, see
Configuring Your Server.

Configuring a Public IP Address

Only configure the public IP address on your Controller nodes if you want to dial in to your
VidyoGateway using your FQDN.
Note Public IP address configuration is intended for use on a cluster VidyoGateway using the
H.323 protocol.
The public IP address should be the address returned by your DNS when looking up the
FQDN for your cluster.
Configuring your public IP address only works when the cluster has a private IP address
(NAT) and is behind an H.323-aware firewall.
For example, if examplecompany.examplegateway.com points to 1.2.3.4 and 1.2.3.4 is
configured in your firewall as the H.323 address, then you would enter 1.2.3.4 in the Public IP
Address field.
To configure a public IP address:
1. Log in to the Admin portal using your System Console account.
For more information, see Logging in to the Admin
114
Portal.
3.