Vidyo VidyoGateway Administrator's Manual page 22

3. Configuring Your Server
Network Interface: Production
IPv4 Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Hostname: gateway
Domain Name: examplecompany.com
Native FQDN: examplegateway.examplecompany.com
For more information, see
Configuring Your Vidyo Server's Management Interface and
2. Configure DNS Nameserver – Enter 2 to specify the Domain Nameserver.
Examples:
Primary DNS Server for Host: 192.168.1.10
Secondary DNS Server for Host: 192.168.1.11
3. Configure NTP Time Servers – Enter 3 to set the Network Time Protocol (NTP) time server.
Change to synchronize the system with a different time server.
Examples:
Primary NTP Server: pool.ntp.org
4. Configure Time Zone – Enter 4 to specify the time zone of your server. Change as
necessary for accurate billing records.
Examples:
US/Eastern
5. Configure Ethernet Options – Enter 5 to set the Maximum Transmission Unit (MTU) size.
The default is 1500. Only change this setting if your network MTU size is less than 1500.
You can also turn autonegotiation on or off. Autonegotiation is on by default.
Examples:
MTU Size: 1500
Autonegotiation: On
Note When Autonegotiation is set to Off, it means 100/Full.
Configuring Network Settings at the System Console
16
and
Port.