Vidyo VidyoGateway Administrator's Manual page 115

5. Configuring Your System
Status
2. Click the
If the VidyoGateway is processing calls, the main area of the screen is populated with call
information such as Call ID, Resolution, Legacy Device, and Conference.
If the VidyoGateway is not currently processing calls, no results appear like the screenshot
previously shown.
When results do display on the screen, they can be filtered by the following:
 In the Address filter, you can filter results by IP of Cluster.
 In the Legacy Device filter, you can filter results by IP of Legacy devices.

In the Conference filter, you can filter by conference room names already set up in your
system.
3. Click Clear Filters to instantly remove any parameters you provided.
4. Click Start Capture.
Start Capture
The
5. Click Start Capture.
Note Logs of calls taking place on your VidyoGateway are recorded into a file only after you click
Start Capture.
6. If the capture is started, a system notification displays indicating it was started
successfully.
7. Click Stop Capture when you want to stop logging the calls taking place on your
VidyoGateway server.
tab.
dialog box displays.
109