Configuring Quality Of Service (Qos) Settings - Vidyo VidyoGateway Administrator's Manual

5. Configuring Your System

When you click Save and Apply, a dialog box informs you that the change drops all of
the active conference calls on your VidyoGateway server.

Settings made while only clicking Save accrue and are applied when you subsequently
click Save and Apply or reboot your VidyoGateway server.

Configuring Quality of Service (QoS) Settings

Quality of Service
The
outgoing media packets.
You can choose between IP Precedence or Differentiated Services Code Point (DSCP) service
types. Depending on the service type selected, you can assign specific values to packets coming
from your VidyoGateway to your VidyoRouter and your Legacy device for video, audio, content
data, and signaling services set on this screen.
With these specified values assigned to media types coming from your VidyoGateway, you can
then configure your network router or switch to prioritize the packets as desired.
Tip: Look online for the most current IP Precedence or DSCP service value conversion table data.
Quality of Service Settings with IP Precedence Selected as the Type of
Service
To configure quality of service settings with IP precedence selected as the type of service:
1. Log in to the Admin portal using your System Console account.
For more information, see
Quality of Service
2. Click the
tab is where you select the service used for prioritizing incoming and
Logging in to the Admin
tab.
Portal.
65