Table of Contents
Advertisement
4. Configuring RADIUS
Note
Enter y for the change settings prompt if the configuration needs to be modified, and
proceed to step 4 in the
Modifying the RADIUS Configuration
To modify the RADIUS configuration:
1.
Log in to the System Console.
2.
Enter D.
The RADIUS server configurations display.
Enter y for the change settings prompt if the configuration needs to be modified.
3.
Note
If you enter y for the change settings prompt, then all RADIUS server configurations will need
to be re-entered.
4.
Re-enter the IP or FQDN of the RADIUS server or leave blank to cancel.
5.
Re-enter the preshared key for the RADIUS server.
6.
Re-enter the IP or FQDN for additional RADIUS servers or leave blank to finish.
Note
A maximum of10 RADIUS servers is supported.
7.
Re-enter the preshared key for the additional RADIUS server.
8.
Re-enter the IP or FQDN for any additional RADIUS server or leave blank to finish.
Modifying the RADIUS Configuration
48
section.
Hide quick links:
Advertisement
Table of Contents
