Table of Contents
Advertisement
3. Configuring Your Server
Press Enter without providing an IP address to return to the Main Menu.
13.
Set 'admin' Password – Enter 13 for password menu options including functions to reset
the admin password to the default value and change password.
Adhere to the password guidelines explained in
Server and Changing the Default
Enter x to return to the Main Menu.
14.
Reboot system – Enter 14 to restart your server.
It can take up to a minute for your server to restart.
15.
Shutdown System – Shuts down your server.
16.
Restore HTTP(S) settings to default – Enter 16 to return HTTP settings to their default
values (HTTP and port 80).
This option is not available on the VidyoGateway and VidyoReplay System Console menu.
17.
... (more options) – Select m for a submenu containing additional options.
For more information, see
Menu.
18.
Exit System Administrator Console – Enter x to close the SSH session. This command also
closes SSH clients, if one is used.
Understanding the More Options System Administrator Console
Menu
The following list describes commands on the More Options menu.
1.
User Administration – Enter 19 to perform user maintenance and create additional System
Console accounts.
For more information, see
Advanced Options – Enter A to access advanced options.
2.
For more information, see
Console
Menu.
3.
... (back to previous menu) – Enter b to return to the Main Menu from More Options.
Understanding the Advanced Options System Administrator Console Menu
The following list describes commands on the Advanced Options menu.
1.
Enable FIPS-mode – Enter 1 to enable or disable FIPS-validated security.
For more information, see
Password.
Understanding the More Options System Administrator Console
Supporting Multiple System Console
Understanding the Advanced Options System Administrator
Configuring FIPS on Your VidyoGateway
18
Logging in to the System Console of Your
Accounts.
Server.
Hide quick links:
Advertisement
Table of Contents
