Configuring Sip Settings - Vidyo VidyoGateway Administrator's Manual

5. Configuring Your System
8. Click Save or Save and Apply as desired.
 When you click Save and Apply, a dialog box informs you that the change drops all of
the active conference calls on your VidyoGateway server.
 Settings made while only clicking Save accrue and are applied when you subsequently
click Save and Apply or reboot your VidyoGateway server.

Configuring SIP Settings

Use the SIP tab to configure your VidyoGateway session initiation protocol (SIP) settings.
Note Values you provide in the fields on the
Nodes. Therefore, the
servers. To make configurations on the tabs, you must access them from your Active
Controller.
To configure the SIP settings:
1. Log in to the Admin portal using your System Console account.
For more information, see
SIP
tab are automatically propagated to your Cluster
SIP
tab does not display when accessed from your Cluster Node
Logging in to the Admin
57
Portal.