Configuring Audio Settings - Vidyo VidyoGateway Administrator's Manual

5. Configuring Your System
The following screenshot shows the fields that appear when the VidyoGateway has been
configured as a cluster VidyoGateway using the
Clusters.
3. In the Primary Gatekeeper field, enter the hostname or IP address of your primary
gatekeeper.
4. In the Gatekeeper Type drop-down, select your gatekeeper type.
5. In the Gatekeeper ID field, enter your Gatekeeper ID.
Note Neighboring mode requires reconfiguration of your external H.323 gatekeeper to support
neighboring. For more information, refer to your external gatekeeper documentation.
6. Click Save or Save and Apply as desired.
 When you click Save and Apply, a dialog box informs you that the change drops all of
the active conference calls on your VidyoGateway server.
 Settings made while only clicking Save accrue and are applied when you subsequently
click Save and Apply or reboot your VidyoGateway server.

Configuring Audio Settings

To configure the audio settings:
1. Log in to the Admin portal using your System Console account.
For more information, see Logging in to the Admin
62
Cluster
tab described in
Portal.
Configuring