Managing Services - Vidyo VidyoGateway Administrator's Manual

5. Configuring Your System
4. Select Cluster Node from the Role drop-down.
5. Enter a Shared Controller IP Address.
6. Click Save and Reboot.
 Any modifications you make to your Clusters accrue until you click Save and Reboot,
when all of your Cluster changes are applied to your VidyoGateway server.

When you click Save and Reboot, a dialog box informs you that the change drops all of
the active conference calls on your VidyoGateway server.

Managing Services

Services
The tab allows you to manage and configure prefixes for various call types both from and
to Legacy devices.
Note At least one service with From Legacy as the Direction must be set as the default in order to
use IVR. For more information about the Default service setting, see
VidyoGateway services specify the type of call, the direction (to and from), and specific profile
details. Prefixes are used when creating a dialing plan (if required) or when isolating a call through
a specific VidyoGateway is necessary.
The VidyoGateway comes with preconfigured services for a variety of protocols. These defaults
allow you to dial without specifying any prepending digits when sending or receiving calls from
Legacy devices. You can modify these services or add new ones. For some service examples, see
Example Configurations.
81
Adding a Service.