Removing The Center Cover; Installing The Battery/Rider Seat/Center Cover/Passenger Seat - Yamaha YZF-R25 Service Manual

EAS31189

REMOVING THE CENTER COVER

1. Remove:
• Center cover "1"
TIP
Unhook the projections "a" on the center cover
from the rear upper side cowlings.
a
1
a
EAS30697
INSTALLING THE BATTERY
1. Install:
• Battery "1"
• Battery band "2"
TIP
Make sure that the portion "a" of the battery band
is facing upward.
EAS31125
INSTALLING THE RIDER SEAT
1. Install:
• Rider seat "1"
Rider seat bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
TIP
Insert the projection "a" on the front of the rider
seat into the hole "b" as shown.
EAS31190
INSTALLING THE CENTER COVER
1. Install:
• Center cover "1"
TIP
Fit the projections "a" on the center cover into
the rear upper side cowlings.
a
1
a
1
2
EAS31126
INSTALLING THE PASSENGER SEAT
1. Install:
• Passenger seat "1"
TIP
Insert the projections "a" on the front of the pas-
senger seat into the grooves "b" as shown, and
then push the rear of the seat down to lock it in
place.
4-2
GENERAL CHASSIS (1)
a
1
b
Center cover screw
1.8 Nm (0.18 m·kgf, 1.3 ft·lbf)
a
a
b
b
1