Main Drive Gear And Bearing - Buell 2007 FIREBOLT Service Manual

HOME

MAIN DRIVE GEAR AND BEARING

GENERAL
PART NO.
HD-35316-C Main drive gear remover and installer
B-45847 Cross plate
HD-47855 Inner/outer main drive gear needle
bearing installation tool
HD-95637-46A Bearing race puller
HD-47856 Seal driver
b1013x6x
11
12
1. Retaining ring
2. Bearing (Inner)
3. Fifth gear mainshaft
4. Bearing (Outer)
5. O-ring
6. Oil seal
SPECIALTY TOOL
10
Figure 6-66. Transmission Assembly-Right Crankcase Half
When removing the main drive gear, the gear is pressed out
against the resistance of the ball bearing inner race. Without
any support at the inner race, the bearing is destroyed.
Whenever the main drive gear is removed the main drive gear
bearing must also be replaced.
9
8
7. Right crankcase half
8. Ball bearing with spacer
9. Retaining ring
10. Oil seal
11. Bearing, (closed end) countershaft
12. Bushing, shifter drum
2007 Buell Firebolt: Drive/Transmission
6.11
NOTE
7
6
5
4
3
2
1
6-37