Buell 2007 FIREBOLT Service Manual page 120

HOME
ADJUST TIMING
1. See Figure 1-51. Remove timing plate cover.
a. Drill rivets holding the timing plate cover.
b. Using a hook, remove timing plate cover.
c. Loosen sensor assembly fasteners.
2. See Figure 1-53. If timing is advanced (mark appears on
left side of window) rotate timing plate counterclockwise.
See Figure 1-52.
3. Check timing. See CHECKING STATIC
4. See Figure 1-54. If timing is retarded (mark appears on
right side of window) rotate timing plate clockwise.
5. Tighten sensor assembly fasteners to 15-30 in-lbs (1.7-
3.4 Nm).
6. Recheck timing.
12136a
Figure 1-51. Timer Cover
8391a
Figure 1-52. Cam Position Sensor (Timing Plate)
b0964x1x
TIMING.
b0963x1x
Figure 1-53. Advanced Timing
Figure 1-54. Retard Timing
2007 Buell Firebolt: Maintenance 1-47