Buell 2007 FIREBOLT Service Manual page 94

HOME
BRAKE PAD THICKNESS
1 1
WARNING WARNING
Always replace brake pads in complete sets for correct
and safe brake operation. Improper brake operation
could result in death or serious injury. (00111a)
See Figure 1-14. Inspect brake pads for damage or excessive
wear. Replace both pads as a set if friction material of either
pad is worn to 0.040 in. (1.0 mm) or less. If this amount of
wear occurs, wear grooves will disappear from friction mate-
rial surface.
BRAKE ROTOR THICKNESS
1 1
WARNING WARNING
Check that no lubricant gets on tires, wheels or brakes
when changing fluid. Traction can be adversely affected,
which could result in loss of control of the motorcycle
and death or serious injury. (00047b)
See Figure 1-15. Check brake rotors for minimum thickness:
At every scheduled service interval:
1. Inspect rotor. Replace rotor if warped or badly scored.
2. Measure rotor thickness. Replace rotor if minimum thick-
ness is less than 0.18 in. (4.5 mm).
NOTE
See 2.12 FRONT BRAKE CALIPER
BRAKE CALIPER for rotor replacement procedure.
Whenever rotor is replaced, replace rotor drive bushings,
fasteners, washers and springs.
7082
1. Friction material
2. Wear groove
3. Backing material
8347
8347
or 2.15 REAR
1
3
2
Figure 1-14. Brake Pad Thickness
Figure 1-15. Front Brake Rotor
2007 Buell Firebolt: Maintenance 1-21