Buell 2007 FIREBOLT Service Manual page 549

HOME
11403
Figure 6-98. Installing Shifter Shaft Assembly
6-52 2007 Buell Firebolt: Drive/Transmission
Figure 6-99. Hex Fastener Countershaft Retainer
2. See Figure 6-98. Depress ratchet arms and insert shaft
assembly into the bushing in the left case half and
release. Ratchet arms should now be inside the end
plate of the shifter drum contacting the shifter drum pins.
3. See Figure 6-99. Apply several drops of LOCTITE 271
(red) to last few threads of countershaft retaining screw.
Thread screw into end of shaft.
4. Place transmission in gear and tighten screw to 33-37 ft-
lbs (44.8-50 Nm).
5. Install transmission sprocket. See
SPROCKET.
6. Continue assembling engine. See appropriate sections
of 3.19 CRANKCASE/ ASSEMBLY
HEAD/3.7 CYLINDER AND PISTON/ ASSEMBLY/
INSTALLATION.
7. Install primary chain and engine sprocket, clutch assem-
bly and primary cover. See
8. Install engine in chassis. See
TION.
11340
6.16 TRANSMISSION
and 3.6 CYLINDER
6.5 PRIMARY CHAIN.
3.5 ENGINE INSTALLA-