Buell 2007 FIREBOLT Service Manual page 103

Table of Contents

Advertisement

HOME
Table 1-8. Potential Limits to Belt Drive Service Life
CONDITION
Excessive load/shock load
Worn sprocket
Tooth shear/cracks
Debris damage
Excessive load/Shock load
Damage due to handling (pry-on, etc.)
Belt breakage
Debris in sprocket or belt
Worn/damaged sprocket
Damaged flange
Damaged idler
Damaged belt
Excessive drive noise
Debris stuck in belt
Debris stuck in sprocket
1-30
2007 Buell Firebolt: Maintenance
ROOT CAUSE
REQUIRED ACTION
Inspect/replace belt
Riding practice/operator choice
Inspect/replace sprocket
Inspect/replace sprocket
Clean and protect drive
Inspect/replace belt
Continue to run but monitor condition frequently
Inspect for damaged or missing guards
Inspect/replace belt
Riding practice/operator choice
Follow proper handling/installation procedure
Inspect/replace sprocket
Clean and protect drive
Inspect/replace belt
Inspect/replace sprocket
Missing/damaged belt guards
Repair flange/replace sprocket
Check structure (bad bearing, bent members, etc.)
Replace idler assembly
Follow proper handling/installation procedure
Inspect/replace belt
Inspect/replace sprocket
Clean and protect drive
Inspect/replace belt
Missing/damaged belt guards
Inspect/replace sprocket
Follow proper handling/installation procedure
Inspect/replace belt
Missing/damaged belt guards

Advertisement

Table of Contents
loading

This manual is also suitable for:

Firebolt series

Table of Contents