Buell 2007 FIREBOLT Service Manual page 213

HOME
PASSENGER
Remove Footpeg
1. See Figure 2-111. Remove clip (7).
2. Remove footpeg pin (9).
3. Remove footpeg (8), detent plate (6), ball (5) and
spring (4).
Remove Heel Guard
1. See Figure 2-111. Remove heel guard fasteners (1).
2. Remove heel guard (2).
Remove Mount
1. See Figure 2-111. Remove footpeg mount fasteners
(10).
2. Remove footpeg mount (3).
1. Heel guard fasteners
2. Heel guard
3. Footpeg mount
4. Spring
5. Ball
6. Detent plate
7. Clip
8. Footpeg
9. Pin
10. Footpeg mount fastener
Figure 2-111. Passenger Footpeg, Mount and Heel Guard Assembly
2-82 2007 Buell Firebolt: Chassis
2
3
4
7
6
5
Install Mount
1. See Figure 2-111. Position footpeg mount (3) onto sub-
frame tail assembly.
2. Install footpeg mount (3). Using LOCTITE 271 tighten,
fasteners (10) to 25-28 ft-lbs (34-38 Nm).
Install Heel Guard
1. See Figure 2-111. Position heel guard (2) onto footpeg
mounts (3).
2. Install heel guard (2).
3. Tighten heel guard fasteners to 48-72 in-lbs (5-8 Nm).
Install Footpeg
1. See Figure 2-111. Position footpeg (8), detent plate (6),
ball (5), and spring (4) on to footpeg mount (3).
2. Install footpeg pin (9).
3. Install clip (7).
4. Check that footpeg clicks in the up and down position.
1
10
9
8
b0933x2x