Buell 2007 FIREBOLT Service Manual page 270

HOME
11970c
Figure 3-51. Correct Routing of Wiring Harnesses and
Interactive Muffler Cable
[
10502
Figure 3-52. Clutch Cable Wire Form Retainer
34. See Figure 3-52. Pull clutch cable back up into the
proper position.
a. Connect clutch cable to handlebars and adjust to
specifications. See
b. Install wire form retainer and tighten fastener to 84-
92 in-lbs (9.5-10.4 Nm).
35. Install sidestand assembly. See
.
2007 Buell Firebolt: Engine
1.9 CLUTCH.
2.40 SIDESTAND.
3-39