Buell 2007 FIREBOLT Service Manual page 258

HOME
Figure 3-26. Center Tie Bar Mount
40. Once engine has been removed from vehicle finish
removing the following items as required:
a. Shifter assembly. See
b. See Figure 3-26. Center tie bar mount.
c. See Figure 3-27.
threaded insert.
d. See Figure 3-28.
exhaust mount.
e. Timer cover.
f. See Figure 3-29.
sprocket cover.
8724
8729
Figure 3-27. Removing Threaded Insert
8725
6.2 PRIMARY COVER.
Swingarm pivot shaft pinch bolt
Aluminum bushings from front
Wire guard located under the
8718
Left Side
8727
Right Side
Figure 3-28. Front Exhaust Mount Bushings (2 piece)
12367
12369a
Figure 3-29. Wire Guard
2007 Buell Firebolt: Engine 3-27