Buell 2007 FIREBOLT Service Manual page 463

HOME
Testing
1. Remove intake cover assembly. See
COVER ASSEMBLY.
2. Remove air cleaner cover. See
ASSEMBLY.
3. Conduct test.
a. Turn key ON for two seconds.
b. Turn key OFF for two seconds.
c. Repeat Steps A and B five consecutive times.
d. Open throttle, replace fuel injectors if there is any
evidence of raw fuel in throttle body manifold.
4. Install air cleaner cover. See
ASSEMBLY.
5. Install intake cover assembly. See
ASSEMBLY.
4-122 2007 Buell Firebolt: Fuel System
2.34 INTAKE
4.44 AIR CLEANER
4.44 AIR CLEANER
2.34 INTAKE COVER
1.
2.
3.
4.
5.
4
3
2
1
Fuel rail fastener
Rear fuel injector
Fuel rail assembly
Clip (2)
Front fuel injector
Figure 4-109. Fuel Injectors
10644
5